IntBuying 26inch Mountain Bike Modified 48V 500W E-bike Kit New

IntBuying ® 26Inch Mountain Bike Modified Kit  E-bike Conversion Kit The kit can  help you to put his beloved mountain bike into a mountain electric  bikes, it combines the advantages of mountain bike and electric cars,  can meet the requirements of cycling exercise and be convenient for you  to travel and desire, at the same time, you can also through the process  of self adapted mountain bike, enjoy the fun of DIY！ The kit is  front wheel Electrical  machine：48V——60V   500W External dia  of tyre：26 inches ( After installing the tyre ) Installation  instructions 1. Install  tires, disc brakes, motor wheels. 2. Install the  battery and replace the speed control handle. 3. Wiring the  controller, install the controller hanging bag. Controller W iring M ethod 1. Turn off the  power supply and the switch lock. 2. Connect the  Hall wire, motor phase wire, switch lock wire, throttle handle  wire,identification wire, and power wire in order to start debugging. 3. Turn  on the switch and the motor starts to rotate. If the wheel rotates in a  forward direction, the debugging is successful; if the wheel rotates in  a reverse direction, unplug the identification wire and connect it again  until it turns in the forward direction and the debugging is successful. 4. After the  debugging is successful, separate the two identification wire, turn the  knob to confirm the success, turn off the switch, and connect other  wires as needed. (When the motor is rotating forward, separate the  identification wire without turning off the power supply, the motor will  stop rotating, and the motor will be fully controlled by the handle at  this time. Turn off the power supply and the commissioning is  completed.) Note 1. Electric  bicycles use direct current, the positive and negative poles of the  power supply must be connected correctly (red is the positive pole, and  black is the negative pole). 2. Make  sure the current is no smaller  than 20A or the motor will not work. 3. Install  circle is the most easy to appear problem, if the disc brake and disc  brake device is not aligned, you can through the gasket to adjust. Item Included: Item Description QTY Unit 141106 Mountain Bike Modified 500W E-bike Conversion Kitit 1 set 48—60V On Sep-17-21 at 20:28:13 PDT, seller added the following information:

Returns Accepted for this item if it's within 30 Days